E-Mail - Fuji Xerox DocuCentre-II C3000 Network Administrator's Manual

E-mail

Enabling the Ports
This section describes the procedure to enable the ports that are used for the E-mail
and iFax features.
1
Start a web browser.
2
Enter the machine's IP address or the Internet address to the address entry column on
the browser, and press the <Enter> key.
Example of the IP address entry
http://192.168.1.1/
Example of the Internet address entry
http://myhost.example.com/
Note
3
Click the [Properties] tab.
4
Click [Port Status].
5
Enable the ports which are used for the E-mail feature.
1) Select the [Enable] check box for [Receive E-Mail] when using the E-mail printing
or iFax feature.
2) Select the [Enable] check box for [Mail Notice Service] when using the mail notice
or job completion notice feature.
6
Reflect the values as the machine's setting values.
1) Click the [Apply New Settings]. A screen to enter the user name and password will
be displayed.
2) Enter the System Administrator user ID and password into [User Name] and
[Password], and click [OK].
Note
3) The right frame on the web browser will change to the machine reboot display.
4) Click [Reboot]. The machine will reboot and the setting value will be reflected.
Network Setting Items (Port/Protocol) for CentreWare Internet Services
• When specifying a port number, add ":" and a port number to the end of the Internet address.
• The default user ID is "11111" and the default password is "x-admin".
9
71