Fuji Xerox DocuColor 5065II User Manual page 39

C-Finisher, C-Finisher with Booklet Maker
No. Component
1 Punch scrap container
2 10 bin sorter
(C-Finisher with Booklet
Maker with 10-bin sorter
only)
3 Output tray
4 Exit cover
5 Finisher tray
6 Staple cartridge
7 Booklet tray
(C-Finisher with Booklet
Maker only)
8 Front cover
9 Booklet unit
(C-Finisher with Booklet
Maker only)
10 Booklet staple cartridge
Note • The C-Finisher and the C-Finisher with Booklet Maker are optional. In this manual, the C-
Finisher or the C-Finisher with Booklet Maker is abbreviated as "finisher".
9
8
Collects the scraps from the puncher. Draw out the box when throwing
the dust away.
Documents can be delivered to the selected bins. This sorter has a
maximum capacity of 100 sheets of paper (P paper) per bin.
Receives documents.
Open this cover to access the insides of the machine to clear paper
jams.
Receives documents.
Staples are stored. Remove this cartridge to replace staples or clear
staple jams.
Receives documents, when folding is selected in the Booklet Creation.
Open this cover to access the insides of the machine to clear paper or
staple jams, replace staples, or throw punch dust away.
This unit is for folding documents in half and stapling the folded
documents.
Two staple cartridges for saddle stitch are installed. Remove this
cartridge to replace staples or clear staple jams.
Machine Components
1
2
3
4
5
6
7
Function
2
37