Original Size (Specifying An Original Size) - Fuji Xerox DocuColor 5065II User Manual

Original Size (Specifying an Original Size)

You can set the scan size for the document.
Specify the scan size when scanning non-standard size documents or when making
scans at a size different from the size of the currently loaded document.
When a document size is specified, it is scanned at the specified size regardless of the
size of the loaded document. This feature allows you to scan the document with adding
or deleting the margin.
1
Select [Original Size].
2
Select a size.
Auto Size Detect
Scan sizes are detected automatically. The machine can detect the following document
sizes.
Document size
Note • If the document size cannot be detected automatically, a screen to input the document size
• You can change document sizes that can be detected automatically on the [Paper Size
Standard Size
Select a document size from a list of 17 pre-configured types.
Free Size
Enter the desired scan size when scanning non-standard size documents or when
making copies at a size different from that of the currently loaded document. Set the
size in the document glass X (horizontal) direction within the range 15 to 432 mm and
in the Y (vertical) direction within the range 15 to 297 mm in 1 mm increments. The
scale on the outside of the document glass is a useful reference for specifying the
document size.
Document feeder
B5, B5 , B4, A5, A5 , A4,
A4 , A3, 8.5 x 11 inches,
8.5 x 11 inches , 11 x 17
inches, 16K , 8K
appears.
Settings] in the System Administration mode. For information about paper size settings, refer
to "Paper Size Settings" (P.219).
Layout Adjustment
Document glass
B6, B6 , B5, B5 , B4, A6,
A5, A5 , A4, A4 , A3, 8.5 x
11 inches , 16K, 16K , 8K
5
143