Sided Copying (Making 2-Sided Copies); Copy Output (Outputting By Specifying Finishing) - Fuji Xerox DocuColor 5065II User Manual

4 Copy
4 Pages Up
Four copies of the document image are made on a single sheet of paper.
8 Pages Up
Eight copies of the document image are made on a single sheet of paper.

2 Sided Copying (Making 2-sided Copies)

This feature is the same as [2 Sided Copying] of the [Layout Adjustment] screen.
Refer to "2 Sided Copying (Making 2 sided Copies)" (P.91).

Copy Output (Outputting by Specifying Finishing)

You can specify the copy output method.
Note
If the offset stacking module is installed, the output position of copies is offset
alternately to distinguish each set of copies.
If the finisher is installed, each set of copies can be stapled or punched, and then
output.
The output destination is automatically selected depending on the selected feature.
4
Documents are delivered on the output tray when [Auto] is selected, or on the finisher
tray when [Collated/Stapling/Punching] or [Uncollated] is selected. For the machine
with the C-Finisher with Booklet Maker, when [Folding/Stapling] for [Booklet Creation]
or [Bi-Folding] for [Folding] is selected, documents are delivered on the booklet tray.
1
Select [Copy Output].
2
Select any item.
Auto
Copies are output collated when
auto document feeder, 2 Sided
Book Copy, Covers, [Blank
Separators & Distribution Sets] or
[No Separators + Distribution Sets]
of [Transparency Separators],
Booklet Creation, Stapling, Build Job, Sample Set, and [Document 50 sheets] are set.
Collated Stapling/Punching
The machine can output sheets sorted into sets that are arranged in page order.
Uncollated
The machine can output the specified number of copies and sort sheets by page.
Uncollated with Separators
The machine outputs copies with inserting blank sheets as a separator and sorts
sheets by page.
116
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.