Loading Tab Paper In The Tray 6 (A3+ High Capacity) - Fuji Xerox DocuColor 5065II User Manual

7 Paper and Other Media

Loading Tab Paper in the Tray 6 (A3+ High Capacity)

The following describes the procedure for loading tab paper in the optional Tray 6 (A3+
High Capacity).
Important • Tab paper can be loaded on the Tray 5 (Bypass) and Tray 6 (A3+ Higy Capacity) only.
Note
1
Pull out the tray towards you until it
stops.
Important • While the machine processes
2
Load and align the edge of the
paper against the right edge of the
tray with the side to be copied or
printed on facing up.
Important • Do not load paper exceeding
Note
3
Push the tray in gently until it comes to a stop.
7
170
• Tab paper can be used only for [Tab Margin Shift], and [Covers/Separators].
• Be sure to fan the paper well. Otherwise, paper may cause paper jams, and multiple sheets
may be fed to the printer at once.
a job, do not pull the tray out
that the job uses.
• Do not add new paper to the
paper on the tray in order to
prevent paper jams or making
mistakes of paper loading.
Remove any paper remaining
in the tray and then load the paper on newly loaded paper.
the maximum fill line. It may
cause paper jams or machine
malfunctions.
• When loading tab paper, make
sure the drilled side toward the
right.