Fuji Xerox DocuColor 5065II User Manual page 341

Category
Error Code
C P S O
016-786 O O [Cause]
016-791 O O [Cause]
016-792
016-793
021-750
021-751
021-770
021-771
021-772
027-720
027-721
027-722
027-727
027-728
027-770
027-771
047-210
O O
Cause and Remedy
When using the scan feature, hard disk capacity is
insufficient for writing to a file.
[Remedy] Either remove unnecessary data from the hard disk to
increase free disk space, or initialize the hard disk.
The forwarding destination or job template save location
could not be accessed.
[Remedy] Check whether you can access the specified forwarding
destination.
O [Cause Specified job history could not be acquired, when
printing [Job Counter Report]
[Remedy] Specified job history does not exist.
O [Cause] The hard disk has run out free space.
[Remedy] Either remove unnecessary data from the hard disk to
increase free disk space, or initialize the hard disk.
O [Cause] During an inspection or maintenance request, a
transmission error occurred, and our Customer Support
Center could not be contacted.
[Remedy] Check that the phone lines are connected, and try
sending an inspection or maintenance request again
after a short time.
If the error persists, contact our Customer Support
Center.
O [Cause] Unable to find the server of an application interface
destination.
[Remedy] Check DNS server address. Or check whether an
application interface in installed on the computer is
registered by DNS server or not.
O [Cause] An application interface destination does not exist.
[Remedy] Check whether an application linked operates correctly.
O [Cause] The jobs was timed out during connection with an
application interface destination.
[Remedy] Try to process the job flow again.
O [Cause] A parameter is illegal during an application interface.
[Remedy] Try to process the job flow again.
O [Cause] The number of files that is required to send to external
services exceeds the maximum number of files that can
be sent.
[Remedy] Try to send again after decreasing the number of pages
that is lower than the maximum number.
O [Cause] The print data cannot be processed because of PDL
error.
[Remedy] Check the print data and try to print again.
O [Cause] A disk full error occurred.
[Remedy] Remove unnecessary data from the hard disk to
increase free disk space.
[Cause] An error occurred with the offset stacking module.
[Remedy] Power-cycle the machine. If the machine is not improved
by performing the relevant remedy, contact our
Customer Support Center.
Error Codes
13
339