Booklet Creation (Creating A Booklet) - Fuji Xerox DocuColor 5065II User Manual

4 Copy

Booklet Creation (Creating a Booklet)

The machine can copy pages laid out so as when multiple-page sheets are overlaid
and folded along the center (gutter), a booklet is created in page order. You can also
set the binding shift and attach a cover when binding documents.
When the C-Finisher with Booklet Maker is installed, [Folding Only] or [Fold & Staple]
becomes available.
Important • Confirm that the orientation of the document and the [Original Orientation] setting of the
Note
1
Select [Booklet Creation].
2
Select any item.
Off
Booklet Creation is not applied to
copies.
4
On - Create Booklet
Copies are made to enable left
binding or top binding.
On - Right Bind Create Booklet
Copies are made to enable right binding.
On - Do not create Booklet
You can output the copies of scanned documents as they are by specifying Fold &
Staple Options. Select this item when you do not need a document to be copied in page
order.
Covers
You can make copies with a cover attached.
94
[Layout Adjustment] screen are the same.
• If the number of pages in the booklet is not a multiple of four, the remaining pages will be
blank pages.
• If [Auto] is set for [Paper Supply], a tray specified in [Auto Paper Off] is automatically
selected. Change the settings if necessary. For more information, refer to "Auto Paper Off"
(P.232).
No Covers
No cover is added.
Blank Covers
A blank sheet of paper is attached as the cover.
Font Cover - 2 Sided
The first and second pages of the original are used as the cover.
Front & Back Covers - Print Outside
The first page of the original is used as the outer page of the cover.
Last Page on Back Cover
The last page of the original is used as the back cover of the booklet. Select the
check box to use the last page as the back cover. When using [Divide Output] to
separate booklets, the cover will be made on the last page of the last subset.