Combine Original Sets (Adding Originals) - Fuji Xerox DocuColor 5065II User Manual

Combine Original Sets (Adding Originals)

This feature allows you to copy sheets of documents that cannot be loaded into the
document feeder at one time. This feature also enables to copy multiple documents as
one job by the document glass.
[Next Original] that is usually displayed while scanning documents with the document
feeder is always selected in this mode. In addition, when using the document glass to
scan documents, [Next Original] is also selected during scanning. If the [Finishing] is
set to [Auto], the output is automatically sorted.
When all documents have been scanned, select [Last Original].
Note • When the time period specified for [Auto Clear] elapses after a set has been copied, the
1
Select [Combine Original Sets].
2
Select [On].
3
Select [Original Orientation].
Off
In the screen displayed during scanning documents with the document feeder with
specifying Collated, [Last Original] is selected.
On
In the screen displayed during scanning documents with the document feeder with
specifying Collated, [Next Original] is selected.
Original Orientation
Refer to "Original Orientation (Specify the Orientation of Loaded Documents)" (P.91).
display returns to the previous screen. Adjust the setting for [Auto Clear] as required. For
details about [Auto Clear], refer to "Auto Clear" (P.196).
Job Assembly
4
123