4.4.5.1 Q-in-Q Port Setting
The Q-in-Q VLAN\Q-in-Q Port Setting screen in
The page includes the following fields:
Object
Q-in-Q
Q-in-Q TPID
Port Q-in-Q
Figure 4-4-5-1
Figure 4-4-5-1: Q-in-Q Port Setting Interface
Description
Sets the Managed Switch to Q-in-Q mode, and allows the Q-in-Q tunnel port
Enable:
to be configured.
The Managed Switch operates in its normal VLAN mode.
Disable:
The default is for the Managed Switch to function in Disable mode.
The Tag Protocol Identifier (TPID) specifies the ethertype of incoming packets on a
tunnel access port.
802.1Q Tag: 8100
vMAN Tag: 88A8
Default: 802.1Q Tag.
Check: Sets the Port to Q-in-Q mode. Or the port operates in its normal VLAN mode.
Default: Un-check.
appears.
85
User's Manual of VC-820M