Administration Configuration; Changing Username And Password - Planet VC-820M User Manual

 Unicast/Multicast: Flood unicast/multicast filter
Control Packets: Control packets filter

 IP multicast: IP multicast packets filter
 Broadcast Packets: Broadcast Packets filter
Syntax:
broadcast select <unicast/multicast | control packet | ip-multicast | broadcast>
Collision-Retry
Description:
Collision-Retry setting
Syntax:
Collision-Retry <off | 16 | 32 | 48>
Parameters:
<16 | 32 | 48> – In Half-Duplex, collision-retry maximum is 16 (or 32, 48) times and packet will be dropped if collisions still
happen
off – In Half-Duplex, if happen collision will retry forever (Default).

6.7 Administration Configuration

6.7.1 Changing Username and Password

hostname
Description:
Set switch name.
Syntax:
hostname <name-str>
Parameters:
<name-str> specifies the switch name. If you would like to have spaces within the name, use quotes ("") around the
name.
no hostname
Reset the switch name to factory default setting.
[no] password
Description:
Set or remove username and password for manager or operator.
Syntax:
[no] password <manager | operator | all>
172
User's Manual of VC-820M