Planet VC-820M User Manual page 158

syslog-server
Description:
Set the syslog server information.
Syntax
syslog-server <IP address > [<0-2>]
Parameters:
<0-2 > specifies logging type. "0" is default value.
0: none
1: major
2: All
[no] sntp
Description:
Enable / disable SNTP.
Syntax
[no] sntp
sntp
Description:
Start SNTP service.
Syntax
sntp <IP address > [<Time Zone Offset>][<Time Range>]
Parameters:
<Time Zone Offset> specifies time zone offset is before / after UTC.
before-utc: Before-UTC
after-utc: After-UTC
<0-24 > Time range <Unit: hour>
158
User's Manual of VC-820M