Installing Sfp Transceiver - Planet VC-820M User Manual

2.2.3 Installing SFP Transceiver

The sections describe how to insert an SFP transceiver into an SFP slot. The SFP transceivers are hot-pluggable and
hot-swappable. You can plug in and out the transceiver to/from any SFP port without having to power down the Managed
Switch, as the Figure 2-1-7

Approved PLANET SFP Transceivers
PLANET Managed Switch supports both single mode and multi-mode SFP transceivers. The following list of approved
PLANET SFP transceivers is correct at the time of publication:
Gigabit SFP Transceiver Modules

MGB-GT

MGB-SX

MGB-LX

MGB-L50

MGB-L70

MGB-L120

MGB-LA10

MGB-LA20

MGB-LB20

MGB-LA40

MGB-LB40
It is recommended to use PLANET SFP on the Managed Switch. If you insert an SFP transceiver
that is not supported, the Managed Switch will not recognize it.
shows.
Figure 2-1-7 Plug in the SFP transceiver
SFP-Port 1000BASE-T Module
SFP-Port 1000BASE-SX mini-GBIC module
SFP-Port 1000BASE-LX mini-GBIC module
SFP-Port 1000BASE-LX mini-GBIC module – 50km
SFP-Port 1000BASE-LX mini-GBIC module - 70km
SFP-Port 1000BASE-LX mini-GBIC module - 120km
SFP-Port 1000BASE-LX (WDM,TX:1310nm) - 10km
SFP-Port 1000BASE-LX (WDM,TX:1310nm) - 20km
SFP-Port 1000BASE-LX (WDM,TX:1550nm) - 20km
SFP-Port 1000BASE-LX (WDM,TX:1310nm) - 40km
SFP-Port 1000BASE-LX (WDM,TX:1550nm) - 40km
24
User's Manual of VC-820M