Sntp Setting; Alarm Configuration - Planet VC-820M User Manual
8-port vdsl2+ 2-port gigabit tp-sfp managed switch
Hide thumbs
Also See for VC-820M:
- Quick installation manual (12 pages) ,
- Quick installation manual (2 pages)
Table of Contents
Advertisement
4.2.8 SNTP Setting
The Simple Network Time Protocol (SNTP) allows user to configure the Managed Switch to send time synchronization
requests to specific time servers (i.e., client mode) via IP address.
The page includes the following fields:
Object
SNTP
SNTP server IP
UTC Type
Time Range (0~24)
Time
4.2.9 Alarm Configuration
This page allows the user to configure Alarm Configuration.
Figure 4-2-8-1: SNTP Setting Web Interface
Description
Enable or Disable SNTP Feature.
Allows to assign an SNTP sever IP address here.
Allows user to select time zone. For example, if your location is in Taipei
(UTC+08), you have to choose After-UTC. If your location is in San Francisco
(UTC-08), you have to choose Before-UCT.
Allows user input time range. For example, if time zone is UTC+08, input 8; if
time zone is UTC-05, input 5.
Shows current time after being connected to NTP server.
55
User's Manual of VC-820M
Advertisement
Table of Contents
