Boot Removal; Door Assembly Removal - Maytag MAH2400AW Service Manual

Disassembly Procedures
!
6. Remove 5 screws retaining Control Board to Console.
8. Separate the Control Board from the Console.

Boot Removal

1. Disconnect power supply to unit.
2. Remove Boot retainer spring.
©2004 Maytag Services
WARNING
16023430 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
3. Remove boot retainer wire from groove.
4. Pull boot over lip on Front Panel.

Door Assembly Removal

1. Remove Door Hinge with screwdriver and 5/16"
wrench.
19