Boot Removal; Heater Removal - Maytag MAH9700AW* Service Manual

Disassembly Procedures
!
8. Lift Front Panel from bottom brackets.

Boot Removal

1. Disconnect power supply to unit.
2. Remove Top Cover.
3. Remove Console.
4. Remove Front Panel.
5. Loosen boot clamp at the 12 o'clock position.
32
WARNING
16025909 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
NOTE: When installing the boot align the index tabs on
the boot with the screws on either side of the Fill
Tube.

Heater Removal

1. Disconnect power supply to unit.
2. Remove Top Cover.
3. Remove Console.
4. Remove Front Panel.
5. Remove Thermistor and Heater wiring connectors.
6. Loosen 10mm nut on Heater and remove Heater
Element.
NOTE: Install Heater Element on top of metal bracket.
©2005 Maytag Services