Disassemble Door; Front Panel/ Door Latch Removal - Maytag MAH2400AW Service Manual

Disassembly Procedures
!
Disassemble Door Assembly
1. Disconnect power supply to unit.
2. Remove Door Assembly
3. Remove screws on door inner panel.
4. Remove pin through door strike.
5. Unsnap handle from retainer.
20
WARNING
16023430 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
6. Remove glass sight window from frame.
NOTE: Align indent in glass with drain hole in frame
during reassembly.

Front Panel/ Door Latch Removal

1. Disconnect power supply to unit.
2. Remove Console.
3. Remove Toe Panel.
4. Remove 3 screws on Front Panel bottom.
©2004 Maytag Services