Maytag MAH2400AW Service Manual page 25

Disassembly Procedures
!
23.Use weight bolts to lift tub and unhook Suspension
Springs.
24.Grasp the front and rear of the tub and remove from
cabinet.
25.Loosen screw and remove boot from tub lip.
©2004 Maytag Services
WARNING
16023430 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
26. Remove rear Spinner Pulley.
NOTE: After Spinner Pulley bolt is removed Spinner can
fall from tub. Block Spinner to prevent Spinner
from falling free.
27. Remove bolts around perimeter and separate the tub
halves.
NOTE: During reassembly snug bolts in a cross pattern
before tightening to prevent tub warp.
28. Remove Spinner.
25