Boot Removal - Maytag MAH6700AW Series Service

Disassembly Procedures
!
8. Lift Front Panel from bottom brackets.

Boot Removal

1. Disconnect power supply to unit.
2. Remove Top Cover (See "Top Cover Removal").
3. Remove Console (See "Console Removal").
4. Remove Front Panel (See "Front Panel Removal").
5. Loosen boot clamp at the 12 o'clock position.
30
WARNING
To avoid risk of electrical shock, personal injury or death;
disconnect power to unit before servicing.
NOTE: When installing the boot align the index tabs on
the boot with the screws on either side of the Fill
Tube.
16026186
©2006 Maytag Services