Preliminary Work
WARNING!
- Disconnect the battery "earth" or "ground" connection.
- Depressurize the cooling system.
- Copy the factory number from the original type label to the duplicate type label.
- Remove years that do not apply from the duplicate label.
- Attach the duplicate label (type label) in the appropriate place.
- Completely remove the battery
- Remove the coolant reservoir cap.
- Remove the fuse and relay box.
- Open the fuel tank cap, ventilate the tank.
- Close the tank cap again.
- Fold over the rear seat surface.
- Open the right-hand fuel sender service lid.
- Remove the fuel-tank sending unit in accordance with the manufacturers specifications.
1
1
Fiat Grande Punto
Heater unit installation location
1 Heater unit
Installation
location
5