Menu Options For Security Settings; Menu Options For Check Fax Connection - Epson XP-830 Series User Manual

User's Guide
Select the type of phone system to which you have connected the printer. When set to Pulse, you can
temporarily switch the dialing mode from pulse to tone by pressing ("T" is entered) while entering
numbers on the fax top screen. Depending on the country or region, this setting may not be displayed.
Dial Tone Detection
Detects a dial tone before starting to dial. If the printer is connected to a PBX (Private Branch
Exchange) or digital phone line, the printer may fail to start dialing. In this situation, change the Line
Type setting to PBX. If this does not work, disable this feature. However, disabling this feature may
drop the first digit of a fax number and send the fax to the wrong number.
Fax Speed
Select the fax transmission speed. We recommend selecting Slow(9,600bps) when a communication
error occurs frequently, when sending/receiving a fax to/from abroad, or when you are using an IP
(VoIP) phone service.
ECM
Automatically corrects errors in the fax transmission (Error Correction Mode), mostly caused by
telephone line noise. If this is disabled, you cannot send or receive documents in color.
Line Type
Select the line type to which you have connected the printer. When using the printer in an environment
that uses extensions and requires an external access code, such as 0 and 9, to get an outside line, select
PBX and register the access code. Once you have registered the access code, enter # (hash) instead of the
access code when sending a fax to an outside fax number. For an environment that uses a DSL modem
or terminal adapter, we also recommend setting to PBX.
Related Information
"Making Basic Fax Settings" on page 104
&

Menu Options for Security Settings

Select the menu on the control panel as described below.
Setup > Fax Settings > Security Settings
Auto Erase Backup Data
To prepare for an unexpected power cut due to an electricity failure or an incorrect operation, the
printer temporarily stores backup copies of sent and received documents in its memory. Enable this
option to automatically erase the backups when they become unnecessary after successfully completing
a send or receive operation.
Erase Backup Data
Erases all backup copies temporarily stored in the printer's memory. Run this before you give the printer
to someone else or dispose of it.

Menu Options for Check Fax Connection

Select the menu on the control panel as described below.
Setup > Fax Settings > Check Fax Connection
Faxing
123