Menu Options For Report Settings; Menu Options For Communication - Epson XP-830 Series User Manual

User's Guide
Reduces large received documents to fit on the paper in the paper source. Reducing may not always be
possible depending on the received data. If this is turned off, large documents are printed at their
original size on multiple sheets, or a blank second page may be ejected.
Collation Stack
Prints received documents from the last page (print in descending order) so that the printed documents
are stacked in the correct page order. When the printer is running low on memory, this feature may not
be available.
Print Suspend Time
Saves documents received during the specified time period in the printer's memory without printing
them. At the time specified to restart printing, the saved documents are automatically printed. This
feature can be used for noise prevention at night or to prevent confidential documents from being
disclosed while you are away. Before using this feature, make sure there is enough free memory.

Menu Options for Report Settings

Select the menu on the control panel as described below.
Setup > Fax Settings > Report Settings
Last Transmission Report
Prints a report automatically after a fax is sent. Select On Error to print a report only when an error
occurs.
Attach Image to Report
Prints a Last Transmission report with an image of the first page of the sent document. Select
On(Large Image) to print the upper part of the page without reducing. Select On(Small Image) to
print the entire page reducing it to fit onto the report.
Fax Log Auto Print
Prints the fax log automatically. Select On(Every 30) to print a log every time 30 fax jobs are completed.
Select On(Time) to print the log at a specified time. However, if the number of fax jobs exceeds 30, the
log is printed before the specified time.
Report Format
Select a format for fax reports other than Protocol Trace. Select Detail to print with error codes.

Menu Options for Communication

Select the menu on the control panel as described below.
Setup > Fax Settings > Communication
Header
Enter your sender name and fax number. These appear as a header on outgoing faxes. You can enter up
to 40 characters for your name, and up to 20 digits for your fax number.
Dial Mode
Faxing
122