Copying; Copying Basics - Epson XP-830 Series User Manual

User's Guide

Copying

Copying Basics

1. Load paper in the printer.
Important:
c
❏ When loading in the paper cassette, make the paper settings on the control panel.
❏ When loading in the rear paper feed slot, do not load paper now. When you select the rear paper feed slot as
the paper source setting, and then press the
instructions to load the paper.
2. Place the originals.
If you want to copy multiple originals or make 2-sided copies, place all of the originals on the ADF.
3. Select Copy on the control panel.
4. Set the number of copies using – or +.
5. Select color copy or monochrome copy.
6. Check the settings such as the paper size and the paper type and change settings if necessary.
Note:
❏ If you want to copy by reducing or enlarging the size of a document by a specific percentage, select Custom Size as
the Reduce/Enlarge setting, and then enter a percentage on the screen displayed.
❏ When using ADF, you can only copy on A4-size plain paper at the same magnification.
If you change any of the following settings, you cannot copy using the ADF.
❏ Reduce/Enlarge: Actual Size, or Auto Fit Page for A4, 2-up Copy
❏ Paper size: A4
❏ Paper type: plain papers
❏ If you place originals that are larger than A4 size on the ADF, they are trimmed to A4 size.
x
7. Press the button. When printing from the rear paper feed slot, press the
when you are instructed to do so.
Related Information
"Loading Paper in the Paper Cassette 1" on page 25
&
"Loading Paper in the Paper Cassette 2" on page 29
&
"Loading Paper in the Rear Paper Feed Slot" on page 33
&
"Placing Originals on the Scanner Glass" on page 38
&
"Placing Originals on the ADF" on page 36
&
"Menu Options for Copy Mode" on page 86
&
Copying
x
button, the printer will prompt you to load paper. Follow the
85
x
button, and then load paper