Table of Contents
Advertisement
Power Outages
The remote will work if household current (AC power) is disconnected. The batteries inside the receiver
will continue to power the heater but the accent lights and blower will not operate.
Display Fahrenheit or Celsius
With the system in the "OFF" position, press both the MODE and THERMOSTAT buttons
simultaneously to toggle between Fahrenheit (F) and Celsius (C) (see the illustration below).
Normal Operating Sounds
Extinction Pops
It is not unusual, especially on Propane
(LP) appliances, to experience a "pop"
when the burner is shut off.
Pilot Assembly
The pilot flame will make a clicking
sound when starting up. If left on, it
will make a slight whisper sound.
Normal Operating Odors
This appliance has several areas that reach high temperatures. Dust or other particles on these areas
may burn and create an odor. This is normal during start-up. You may notice the smell is more acute if
the appliance was left idle for a long period.
© Travis Industries
Operation
The appliance may creak with change of
temperature -- THIS IS NORMAL.
4051112
F
F
C
Blower(s)
The blower(s) push heated air into the
room. You will hear the sound of air
movement that increases as the speed is
increased.
Gas Control Valve
As the gas control valve is turned
on and off you will hear a dull
clicking sound. This is the valve
opening up and shutting down.
100-01271_000
39
Figure 15
Advertisement
Table of Contents
