Manual On-Off / Smart Thermostat / Standard Thermostat - Travis Industries 616 GSR Green Smart Owner's Manual

Manual On-Off / Smart Thermostat / Standard Thermostat

Use the thermostat button to cycle through the three thermostat settings (see
 MANUAL ON/OFF – The burner will turn on and off using the remote (see
On/Off button to control the burner. When off, the display will only show the current temperature.
 SMART THERMOSTAT – While in Smart Thermostat mode, the transmitter will control the flame
height to achieve the target temperature ("smart modulation"). If the temperature exceeds the
target temperature the heater will shut off. This allows the heater to stay on longer and provide a
more consistent temperature. To adjust the target temperature, press the Up and Down buttons
until a suitable temperature is achieved. (See
When in smart thermostat
setting, the word "SMART"
 STANDARD THERMOSTAT - While in standard thermostat setting, the transmitter will turn the
burner on and off to achieve the target temperature (see
temperature, press the up and down buttons until a suitable temperature is achieved.
When in standard thermostat
setting, the word "ON" will
NOTE: If the transmitter batteries go dead while in thermostat setting (standard or smart), the appliance
will shut off after approximately 24 hours.
© Travis Industries
Operation
Look here for the
thermostat setting.
F
ON
MAX AUX
When in manual setting, the
word "OFF" will appear here.
SMART
will appear here.
MAX
ON
appear here.
MAX
Press the thermostat button to cycle
through the thermostat settings.
ON
OFF
MAX MAX AUX
below.)
Figure 6
F
This is the target temperature
on the read-out. Use the up
or down buttons to adjust the
target temperature.
AUX
Figure 7
F
This is the target temperature
on the read-out. Use the up
or down buttons to adjust the
target temperature.
AUX
4051112
).
Figure 4
OFF
SMART
). Press the
Figure 5
F
below). To adjust the target
100-01271_000
35
Figure 4
Figure 5
Figure 6
Figure 7