Adjusting The Blower Speed (Optional); Normal Operating Odors; Power Outages - Travis Industries Xtrordinair ProBuilder 36 CleanFace MV Owner's Manual

Adjusting the Blower Speed (Optional)

The optional blower helps transfer heat from the heater into the room. It will not turn on until the heater is
up to temperature (approximately 10 minutes after starting). See the illustration below for instructions on
adjusting the blower speed.

Normal Operating Odors

This appliance has several areas that reach high temperatures. Dust or other particles on these areas
may burn and create an odor. This is normal during start-up. You may notice the smell is more acute if
the appliance was left idle for a long period.

Power Outages

The heater will work if household current (AC power) is disconnected.
© Travis Industries
Operation
5/9/19 - 1490
9
PB 36/44 CF MV Operation