Starting The Heater For The First Time; Location Of Controls - Travis Industries 616 GSR Green Smart Owner's Manual

Starting the Heater for the First Time


Burn the heater at a high setting with the blower off for an extended period (up to 48 hours). This will
cure the painted surfaces. Fumes from the paint curing and oil burning off the steel will occur. This
is normal. We recommend opening a window to vent the room.

Condensation may appear on the glass each time you start the heater - this is normal.

Blue Flames will occur on the heater when it first comes on. After fifteen minutes the flames will turn
a more realistic yellow and orange color.

Verify the receiver and batteries are installed (see page 40).

Location of Controls

Most features will be controlled by the included remote control.
© Travis Industries
Operation
4051112
31
100-01271_000