Travis Industries 616 GSR Green Smart Owner's Manual page 50

50
Optional Equipment
7. Install the LP (propane) orifices.
ORIFICE SIZE (ID)
Front Burner Orifice
Rear Burner Orifice
Front Orifice
8. Remove the pilot orifice following the instructions below. Replace with the propane pilot orifice
(included with stepper motor).
Lift the pilot hood
a
off the pilot
assembly.
© Travis Industries
(for qualified installers only)
Natural Gas
#44 DMS
#45 DMS
Remove the orifice and replace with the LP orifice. Screw the
c
orifice all the way in and replace the pilot hood.
Use a hex wrench to
b
unscrew the orifice.
5/32" Hex
NOTE: when re-attaching,
this pin lines up with the
notch in the pilot hood.
4051112
LP (Propane)
#54 DMS
1.25mm DMS
Rear Orifice
Orifice Identification:
35
LP (Propane) Orifice
35
NG (Natural Gas) Orifice
62
100-01271_000