Advertisement
Insert the Tail Drag Iron Rod into the hole of Linkage
Regulator.
Install the Tail Cover back to the tail of the fuselage
and secure it using Self-Tapping Screws.
Tighten the Vertical Stabilizers to the Horizontal
Stabilizers using four 2x5mm Self-Tapping Screws.
End of Manual
Secure the Tail Drag Iron Rod using M3x3 set screws.
Cut the Top Window Covers and glue them onto the
Top Window positions of the front canopy of the
fuselage.
Insert the Horizontal Stabilizer Sets into the tail of
the fuselage and secure them using epoxy.
6
Advertisement
