Related Manuals for HeliArtist HA-TGA01
Summary of Contents for HeliArtist HA-TGA01
-
Page 2: Important Notes
Thank you for buying HeliArtist Products.600 scale fuselage is designed as an easy way to assembly. Please read this Instruction manual carefully before assembling the model,and follow all precautions and recommendations in the manual.Make sure to retain the manual for future reference,routine maintenance,and tuning. -
Page 3: Before Assembling
600scale fuselage,suitable for T-REX600 EPS Helicopter series. TOOL BEFORE ASSEMBLING 1:Cutter knife. 2:Hexagon screw 1:Check for all the parts in the list come with the manual. driver 3:Phillips screw driver. 4:File. 2:Some basic tools are needed to help the assembly. 5:Diagonal cutting pliers. - Page 4 Fix the Front Landing Gear Fix the Back Landing Gear with with Hex Cap Screw 3x20MM. Self-Tapping Screw 3x10MM. Glue the tail with the body or fix Remove the tail and wait for them with wood pieces by Self- installed. Tapping Screw 2x6mm .
- Page 5 Remove the parts like the picture in Fix the Sponge for Body with the body order to facilitate Installation. and put it into the body. Put the Transition Tail Boom's Installed again the parts was support sponge in the tail like removed from picture no.10 .
- Page 6 Fix the Horizontal Stabilizer with Glue the Horizontal Stabilizer with Self-Tapping Screw3x10mm. AB glue. Glue all the film like the picture. Glue the Decorative Fin with AB glue. Glue the Machine Gun and the Landing Gear. Glue the Rocket Missile on the wing with AB glue.