Advertisement
Quick Links
Advertisement
Related Manuals for HeliArtist 500MD
Summary of Contents for HeliArtist 500MD
-
Page 2: Important Notes
Thank you for buying HeliArtist Products.500 scale fuselage is designed as an easy way to assembly. Please read this instruction manual carefully before assembling the model,and follow all precautions and recommendations in the manual.Make sure to retain the manual for future reference,routine maintenance,and tuning.This scale fuselage is designed for TREX 500 Helicopter series.You can easily put it on your TREX 500 for new clothing. IMPORTANT NOTES R/C helicopters are not toys.R/C helicopter utilize various hightech products and technologies to provide superior performance.Improper use of this product can result in serious injury or even death.Please read this manual carefully before using and make sure to be conscious of your personal safety and the safety of others and your environment when operating all HeliArtist products. Manufacturer and seller assume no liability for the operation or the use of this product.Intended usage of this fuselage is only for adults with experience of flying remote control helicopters at legal flying field.After the sale of this product we cannot maintain any control over its operation or usage. After assembling the scale fuselage,the weight will increase and the structure will become more complex,so we do not recommmend to have any 3D fly as to avoid any accident and damage. R/C products require a certain degree of skill to operate,and is a consumables item.Any damage or dissatisfaction as a result of accidents or modifications are not covered by any warranty and cannot be returned for repair or experience problems during operation or maintenance. -
Page 3: Before Assembling
Fly only in safe areas,away from other people.Do not operate R/C aircraft within the vicinity of homes or crowds of people.R/C aircraft are prone to accidents,failures,and crashes due to a variety of reasons including lack of maintenance,pilot error,and radio interference.Pilots are responsible for their actions and damage or injury happened during the operation or as a result of R/C aircraft models. 500 scale fuselage is suitable for T-REX 500 Helicopter series TOOL 1:Cutter knife. 2:Hexagon screw driver 3:Phillips screw driver. 4:File. BEFORE ASSEMBLING 5:Diagonal cutting pliers.6:Silicone 7:CA glue. 8:AB glue(epoxy) 9:Fine sandpaper. 1:Check for all parts in the part list shown at bellow. 10:Scissors. - Page 4 Insert the Aluminum Landing Skids into the specific holes Insert the Plastic Landing Gears into the landing of Plastic Landing Gears. gear position on the belly of the fuselage. Secure the Landing Skids using four M3x4 set Tighten the 2x20mm Self-Tapping Screws into the screw screws.
- Page 5 Glue the wood pieces together according to the Tighten the wood blocks onto the landing gear position of above photo.(Remarks: the hight of the wood block the Heli Assembly using four M2x18mm Hex Cap Screws with 2x5mm washers. is depend on what heli you use.) Insert the Heli Assembly into the fuselage.
- Page 6 Gule the Tail LED Cover to the LED Cover Mount Glue the Head LED Cover to the Front canopy. on the tail of the fuselage. Cut the Head Window covers as to fit the side windows of Cut the Body Window Covers as to fit the side windows of the the front canopy and secure it with glue.(Remarks: glue all fuselage and secure it with glue.
-
Page 7: End Of Manual
Use two M2.5x30mm screws with washers to Tighten the antenna to the tail position of the fuselage. tighten the Vertical Stablizer Set to the Tail Gear Box. End of Manual...
Need help?
Do you have a question about the 500MD and is the answer not in the manual?
Questions and answers