Subscribe to Our Youtube Channel
Related Manuals for HeliArtist 450 scale fuselage
Summary of Contents for HeliArtist 450 scale fuselage
-
Page 2: Important Notes
Thank you for buying HeliArtist Products.450 scale fuselage is designed as an easy way to assembly. Please read this Instruction manual carefully before assembling the model,and follow all precautions and recommendations in the manual.Make sure to retain the manual for future reference,routine maintenance,and tuning. -
Page 3: Before Assembling
450scale fuselage,suitable for T-REX450EPS Helicopter series. TOOL BEFORE ASSEMBLING 1:Cutter knife. 2:Hexagon screw driver 1:Check for all the psrts in the list come with the manual. 3:Phillips screw driver. 4:File. 2:Some basic tools are needed to help the assembly. 5:Diagonal cutting pliers. 6:Silicone 7:CA glue. - Page 4 13:Washer ￠ 2.5x ￠ 5x0.5mm x2 14:Horizontal Stabilizer x1 15:Wings 16:Head Window Cover(Left & Right)x2 17:Side Window Film(Left & Right) x2 18:Side Window Film(Left & Right) x2 Insert the skid pipes into the front and Glue the Landing Gear in the body like rear landing skids as illustration.
- Page 5 Stick the Wood pieces under the Body.( Put the frame into the Case. Cap Screw2x25mm x4;Nuts 2x5mmx4 ;washer ￠ 2.5x ￠ 5x0.5mmx4) Stick the wood pieces under the center of Put the wood fixing block insert the Combination self-Tapping the body.( Plywood slot.
- Page 6 Glue the Horizontal Stabilizer on the Vertical Stick and make sure the Vertical Stabilizer like the picture. Stabilizer Hex Cap alignment the tail.( (Make sure it is balance. Screw2x18mm;Washer ￠ 2.5x ￠ 5x0.5mm)
Need help?
Do you have a question about the 450 scale fuselage and is the answer not in the manual?
Questions and answers