Related Manuals for HeliArtist EC135
Summary of Contents for HeliArtist EC135
-
Page 2: Important Notes
Thank you for buying YB Products.500 scale fuselage is designed as an easy to use. Please read the manual. carefully before assembling the model,and follow all precautions and recommendations located within the manual. Be sure to retain the manual for future reference,routine maintenance,and turning .The scale fuselage is designed for T-REX 500ESP Helicopter series use. -
Page 3: Before Assembling
500scale fuselge,suitable for T-REX500ESP Helicopter series BEFORE ASSEMBLING TOOL 1:Cutter knife. 2:Hexagon screw driver 3:Phillips screw driver. 4:File. 5:Diagonal cutting pliers. 6:Silicone 7:CA glue. 8:AB glue 9:Fine sandpaper. 10:Scissors. 1:Landing Gear x2 2:Self-Tapping Screw ￠ : M2x14mm x4 3:8mm12mmLanding Skid Mount x4 4:Skid pipes x2 5:Wood Landing Gear Stair x2 6:Self-Tapping Screw ￠... - Page 4 Fix the Landing gear to the body with Put the Landing Gear wear the 8mm ￠ 2x14mmx4 Self-Tapping screws. Landing Skid Mount . Fix the Wood Landing Gear Stair on the Insert the skid pipes into the front and Landing Gear with Landing M2x12mm x4 rear landing skids as illustration.
- Page 5 Put the body into the fuselage. Put the Transition Tail Boom's support sponge in the tail. Fix the rack on the case's backplane with Use wood pieces to support the body. ￠ 3.0x12mm X2 Combination self-Tapping Screw. Stick the Wings with Horizontal Make sure the tail have lock.
- Page 6 Stick the Horizontal Stabilizer with the tail.