End Of Manual - HeliArtist EC145 Instruction Manual

17
Adjust the Heli Mechanism in the fuselage and drill 2mm
holes on both the left and right side of the Fuselage body
wood block.
19
Or we can secure the Heli mechanism onto the wood block
of the fuselage using a Zip Tie.
21
Assemble the Horizontal and Vertical Stabilizers together
using two 2x6mm Self­Tapping Screws.

End of Manual

Reinstall the M2 screw which is took off in the previous
step 7 back to the Scorpion Tail Gear Box and tighten it
now. And insert the Linkage Ball to the Ball Link of the Tail
Push rod.
18
Secure the Heli mechanism onto the wood block of the
fuselage using two 2x12mm Hex Cap Screws and Washers
with M2 Nuts.
20
Install the Tail Cover back to the fuselage using Self­
Tapping screws.
22
Insert the Horizontal Stabilizers into the tail of the fuselage
and secure them using epoxy.
6