Advertisement
Fly only in safe areas,away from other people.Do not operate R/C aircraft within the vicinity of homes or crowds of
people.R/C aircraft are prone to accidents,failures,and crashes due to a variety of reasons including lack of
maintenance,pilot error,and radio interference.Pilots are responsible for their actions and damage or injury
happened during the operation or as a result of R/C aircraft models.
500scale fuselge,suitable for T-REX 500 Helicopter series
BEFORE ASSEMBLING
1:Check for all parts in the part list shown at bellow.
2:Some basic tools are needed to help the assembly.
1:Aluminum Landing Gear set x2
2:Landing Gear Mount x4
3:Aluminum Skids x2
4:Scorpion Tail System x1
5:Wood pieces
6:Screw M2x20mm x4
7:Washers ￠ 2x ￠ 5x0.5mm x4
8:Seft-Tapping Screws 2x12mm x4
9:Linkage Regulator x2
10:Tail Drag Iron Rod x1
11:Set Screws M3x3mm x2
12:Top Window Covers x2(Left & Right)
13:Horizontal Stabilizers x2(Left & Right)
14:Vertical Stabilizers x2 。
TOOL
1:Cutter knife. 2:Hexagon screw driver
3:Phillips screw driver. 4:File.
5:Diagonal cutting pliers.6:Silicone
7:CA glue. 8:AB glue(epoxy) 9:Fine sandpaper.
10:Scissors.
15:Seft-Tapping Screws 2x5mm x4
3
Advertisement
