Related Manuals for HeliArtist 600 UH-1
Summary of Contents for HeliArtist 600 UH-1
-
Page 2: Important Notes
Thank you for buying HeliArtist Products.600 scale fuselage is designed as an easy way to assembly. Please read this instruction manual carefully before assembling the model,and follow all precautions and recommendations in the manual.Make sure to retain the manual for future reference,routine maintenance,and tuning.This scale fuselage is designed for T-REX600E/Nitro... -
Page 3: Before Assembling
600scale fuselage,suitable for T-REX600 ESP Helicopter series. TOOL 1:Cutter knife. 2:Hexagon screw driver BEFORE ASSEMBLING 3:Phillips screw driver. 4:File. 5:Diagonal cutting 1:Check for all the parts in the list come with the manual. pliers.6:Silicone 2:Some basic tools are needed to help the assembly. 7:CA glue. - Page 4 Put the Landing Gear wear the 8mmLanding Fix the Landing Skid on the Body with Skid Mount . Self-tapping Screw. Install all of the main frame rod Put the Landing Skid pass through the Landing Skid Mount. and the Transition Gear. Install the Tail Control Guide.
- Page 5 Open the tail cover. Put the rack into the body. Link the tail with the body. Installed again the parts from picture no.8 . removed Fix the Rack Fortunately chassis with Install the Transition tail ¢3.0x10mmSelf-tapping Screw. cover. Glue the wood pieces on the body, Removed the first front door and Than,fix the tail with the body by the side door.
- Page 6 Stick the Simulation seat's parts Stick the Simulation seat in the on the location like the picture. body with Ab glue. Stick the Dashboard in the Glue the doll to the seat then stick body's appropriate location. the seat to the body. Stick the Horizontal Stabilizer Stick the plastic parts on the with AB glue.
- Page 7 Stick the plastic parts on the location like the picture.