Advertisement
Insert the Aluminum Landing Gears into the
landing gear holes on the button of the fuselage
and fix them using epoxy.
Insert the Landing Gear Skids onto the Landing Gear
Mounts.
Disassembling the Tail Cover from the fuselage.
Insert the Landing Gear Mounts onto the Landing
Gear Sets.
Replace the 500 belt with a longer one included in the fuselage and
secure the Scorpion Tail System onto the tail boom. Then loosen
and take off one screw from the tail system as shown above and
strengthen the tail system before insert it with the Heli assembly
into the fuselage.
Glue the wood pieces together according to the
above photo.(Remarks: the hight of the wood block
is depend on what heli you use.)
4
Advertisement
