Related Manuals for HeliArtist B0105
Summary of Contents for HeliArtist B0105
-
Page 2: Important Notes
Thank you for buying HeliArtist Products.500 scale fuselage is designed as an easy way to assembly. Please read this instruction manual carefully before assembling the model,and follow all precautions and recommendations in the manual.Make sure to retain the manual for future reference,routine maintenance,and tuning.This scale fuselage is designed for TREX 500 Helicopter series.You can easily put it on your TREX 500 for new clothing. IMPORTANT NOTES R/C helicopters are not toys.R/C helicopter utilize various hightech products and technologies to provide superior performance.Improper use of this product can result in serious injury or even death.Please read this manual carefully before using and make sure to be conscious of your personal safety and the safety of others and your environment when operating all HeliArtist products. Manufacturer and seller assume no liability for the operation or the use of this product.Intended usage of this fuselage is only for adults with experience of flying remote control helicopters at legal flying field.After the sale of this product we cannot maintain any control over its operation or usage. After assembling the scale fuselage,the weight will increase and the structure will become more complex,so we do not recommmend to have any 3D fly as to avoid any accident and damage. R/C products require a certain degree of skill to operate,and is a consumables item.Any damage or dissatisfaction as a result of accidents or modifications are not covered by any warranty and cannot be returned for repair or experience problems during operation or maintenance. -
Page 3: Before Assembling
Fly only in safe areas,away from other people.Do not operate R/C aircraft within the vicinity of homes or crowds of people.R/C aircraft are prone to accidents,failures,and crashes due to a variety of reasons including lack of maintenance,pilot error,and radio interference.Pilots are responsible for their actions and damage or injury happened during the operation or as a result of R/C aircraft models. 500scale fuselge,suitable for T-REX 500 Helicopter series TOOL 1:Cutter knife. 2:Hexagon screw driver 3:Phillips screw driver. 4:File. BEFORE ASSEMBLING 5:Diagonal cutting pliers.6:Silicone 7:CA glue. 8:AB glue(epoxy) 9:Fine sandpaper. 10:Scissors. 1:Check for all parts in the part list shown at bellow. 2:Some basic tools are needed to help the assembly. - Page 4 Insert the Aluminum Landing Gears into the Insert the Landing Gear Mounts onto the Landing landing gear holes on the button of the fuselage Gear Sets. and fix them using epoxy. Insert the Landing Gear Skids onto the Landing Gear Replace the 500 belt with a longer one included in the fuselage and secure the Scorpion Tail System onto the tail boom.
- Page 5 Tighten the wood blocks to the Heli assembly Insert the Heli assembly into the fuselage. using M2x20mm screws with 2x20mm washers. Reinstall the screw which is took out of previous Secure the Heli assembly through the wood blocks step back to the tail system and tighten all screws using four 2x12mm Self-Tapping Screws.
-
Page 6: End Of Manual
Insert the Tail Drag Iron Rod into the hole of Linkage Secure the Tail Drag Iron Rod using M3x3 set screws. Regulator. Install the Tail Cover back to the tail of the fuselage Cut the Top Window Covers and glue them onto the and secure it using Self-Tapping Screws.