Advertisement
Fly only in safe areas,away from other people.Do not operate R/C aircraft within the vicinity of homes or crowds of
people.R/C aircraft are prone to accidents,failures,and crashes due to a variety of reasons including lack of
maintenance,pilot error,and radio interference.Pilots are responsible for their actions and damage or injury
happened during the operation or as a result of R/C aircraft models.
450scale fuselge,suitable for T-REX450 Helicopter series
BEFORE ASSEMBLING
1:Check for all the parts in the list shown at bellow.
2:Some basic tools are needed to help the assembly.
1
2
3
7
10
1:Aluminum Landing Gears x2
2:Aluminum Skids x2
3:Landing Gear Mount x4
4:Skid Pipe End Cap x4
5:Wood Landing Gear Stair x2
Note:
Most of the 450 EC-145 fuselage assembly steps are similar
To 450 EC-135.
5
4
8
9
6:Scorpion Tail System Set x1
7:Wood Piece Set x1
8:Horizontal Stabilizer x2
9:Vertical Stabilizer x2
10:Screw Pack x1 set: (2x5mm Washers x6, M2 Nut x2, M2x12 Hex Cap Screws x2,
TOOL
1:Cutter knife. 2:Hexagon screw driver
3:Phillips screw driver. 4:File.
5:Diagonal cutting pliers.6:Silicone
7:CA glue. 8:AB(epoxy) glue 9:Fine sandpaper.
10:Scissors.
6
Self-Tapping Screws: 2x6mm x4, 2x10mm x4, 2x12mm x4,
2X14mm x4.)
3
Advertisement
