Table of Contents
Advertisement
da Vinci 1.0 Pro
Functional operations and descriptions
Unloading Filament
● UTILITIES > CHANGE CART > UNLOAD FILAMENT
In unloading filament, activating the filament unloading function on the control panel of the printer
1. Wait for the extruder to heat up to operating temperature and unload the filament.
2. As "PULLOUT FILAMENT" is displayed on the screen, press the release arm and pull out the filament.
Temperature Setting
● SETTINGS > USER FILAMENT
The user may customize nozzle temperature, print bed temperature and filament unloading tempera-
ture in accordance with requirements of different filaments and design objects:
1
Select the item for temperature setting
A
Nozzle
Press "OK" to enter temperature
setting for nozzle
2
Temperature Customization:
● Use "left key", "right key" to select the digit (single, tens, hundreds) for the temperature to be adjusted.
● Use "up key", "down key" to adjust the value.. The up key is for increasing value, and the down key is for
decreasing value. Press "OK" key to apply setting.
● If your customized temperature exceeds allowable setting range, press "OK" and a setting range alert
will be displayed.
● Once parameter settings are complete, return to the previous page and select "APPLY SETTING" to
save and apply the settings that you have specified.
3
Constraints of Customized Temperature Range
NOZZLE
BED
UNLOAD
Remarks:
The temperature setting in this procedure is applicable only to 3D Builder application software developed by Mic-
rosoft. For more information about 3D Builder, please visit the Microsoft website
● If the temperature for print bed is specified as 40° C, room temperature printing will be enabled and the print bed will not
be heated.
● Excessively low extruder temperature may result in poor filament feeding, result in poor filament feeding that prevents
proper extrusion of the filament through the nozzle. Hence, please adjust the operating temperature of the extruder first.
P 14
B
Print Bed
Press "OK" to enter temperature
setting for print bed
Warming up of the nozzle of the extruder in feeding and print-
ing: 170℃ ~ 240℃
Temperature elevation range of the print bed: 40℃ ~90℃
Temperature elevation range of the extruder in unloading:
170℃ ~240℃
C
Filament Unloading
Press "OK" to enter temperature
setting for filament unloading
V.1.1
Hide quick links:
Advertisement
Table of Contents
