XYZ Printing da Vinci 1.0 Pro User Manual page 10

da Vinci 1.0 Pro
SETTINGS
The basic settings of the machine, functions, selection and adjustment of printing values, including:
◆ USER FILAMENT ◆ BUZZER ◆ AUTO HEAT ◆ LANGUAGE ◆ ENERGY SAVE ◆ RESTORE DEFAULT
Pro. 1
UTILITIES
SETTINGS
INFO
USER FILAMENT
The user can customize the temperature of the extruder, print bed and unload filament based on the requirements of filament and
designing objects.
NOZZLE
USER FILAMENT
APPLY SETTING
------------------------
>NOZZLE: 210 ℃
Refer to P.14 for Temperature Setting
BUZZER
When the buzzer is turned on, the printer will output an audible signal when a button is pressed, print job is finished, or
issue is detected.
SETTINGS
USER FILAMENT
BUZZER
AUTO HEAT
●
Buzzer is turned on by default, you can select "OFF" and press "OK" to change the setting.
AUTO HEAT
SETTINGS
BUZZER
AUTO HEAT
LANGUAGE
●
When "AUTO HEAT" is turned on, the printer heats up the extruder and the print bed after powered on.
This helps to shorten the idle time that is necessary to heat up the printer before printing.
●
"AUTO HEAT" is off by default. you can select "ON" and "OK" to change the setting.
LANGUAGE
We suggest setting the language shown on the printer screen before use. The user can switch among
English, Japanese, French, German, Italian and Spanish. English is the preset language. For other languages:
Use "UP" and "DOWN" buttons to select the desired language and press "OK" to change setting.
SETTINGS
AUTO HEAT
LANGUAGE
ENERGY SAVE 03M
P 10
Print Bed
USER FILAMENT
NOZZLE: 210 ℃
>BED:
UNLOAD: 170 ℃
BUZZER
OFF
ON ON
OFF
AUTO HEAT [OFF]
ON OFF
OFF ON
LANGUAGE
OFF ENGLISH
EN
ニホンゴ
FRANCAIS
Filament Unloading
USER FILAMENT
NOZZLE: 210 ℃
040 ℃ BED:
>UNLOAD: 170 ℃
040 ℃
V.1.1