XYZ Printing da Vinci 1.0 Pro User Manual page 8

da Vinci 1.0 Pro
2
Select the built-in sample to be printed
BUILD SAMPLE
DEMO
KEY CHAIN
HEART
Select "YES" and press "OK"
KEY CHAIN
START BUILDING?
NO
YES
After completion of print, take off the print product.The print bed patch is reusable,replace the patch when it is worn out.
Note:
Stick the bed tape onto the print bed before printing or apply some glue stick on the bed tape for objects with
special structures to make the tape more adhesive and the object more difficult to remove.
CHANGE NOZZLE
UTILTIES
BUILD SAMPLE
> CHANGE NOZZLE
CLEAN NOZZLE
Turn off the printer after the printing device and print bed automatically move to their positions and change
the printing module.
Levelness of the Print Bed may be susceptible to vibration during transportation, which may
influence print quality. Please adjust the bed with reference to「Print Bed Adjustment」 before printing.
P 8
CHANGE NOZZLE
ARE YOU SURE?
NO
YES
TURN OFF POWER
AND THEN CHANGE
NOZZLE MODULE
V.1.1