Seagull Models Shoestring SEA143 Assembly Manual page 11

www.seagullmodels.com
9) Set the aileron hatch in place and use a
Phillips screw driver to install it with four wood
screws.
may need to adjust the size of the precut open-
ing in the mount. The notch in the sides of the
mount allow the servo lead to pass through.
collets onto the throttle servo. Test fit the servo
into the aileron servo mount.
vided with your radio system.
INSTALLING THE FUSELAGE SERVO.
Because the size of servos differ, you
1) Install the rubber grommets and brass
2) Secure the servos with the screws pro-
Rudder servo .
Elevator servo .
11