Care And Maintenance - Nonin Avant 9700 Operator's Manual

Care and Maintenance

The advanced digital circuitry within the pulse oximeter of the Avant 9700 requires
no calibration or periodic maintenance other than battery replacement.
Field repair of the Avant 9700 circuitry is not possible. Do not attempt to open the
Avant 9700 case or repair the electronics. Opening the case will damage the Avant
9700 and void the warranty. If the Avant 9700 is not functioning properly, see
"Troubleshooting."
Cleaning the Avant 9700
Clean the Avant 9700 with a soft cloth dampened with isopropyl alcohol. Do not
pour or spray any liquids onto the Avant 9700, and do not allow any liquid to enter
any openings in the device. Allow the unit to dry thoroughly before using it.
IMPORTANT! Do not immerse the Avant 9700 in liquid, and do not use
caustic or abrasive cleaning agents on the Avant 9700.
Clean the Avant 9700 separately from its associated sensors. For instructions
regarding cleaning pulse oximeter sensors, refer to the appropriate pulse oximeter
sensor package inserts.
19