RIB comet s Operating And Installation Instructions page 20

Pag. 20 di 28
E
N
To obtain the best performances of the above mentioned devices, you have to install an aerial
G
tuned on the installed radio receiver frequency.
L
N.B. Keep much attention that the central wire of the cable does not enter in touch with the
external copper braiding, which would nullify the functioning of the aerial.
I
The aerial must be installed perpendicularly and must be in the sight of the remote control.
S
ANTENNA SPARK 433 code ACG5252
LAMPEGGIATORE SPARK 230V with incorporated intermittent card code ACG7059
H
(on request 120V 40W code ACG7060)
FIT SYNCRO PHOTOCELLS for the wall-installation - code ACG8026
The range you can set Is 30÷60ft.
You can fit many couples close together thanks to the synchronising circuit.
Add the SYNCRO TRANSMITTER, code: ACG8028, for more than 2 photocells couples (up to 4)
COUPLE OF BUILT-IN BOXES FOR THE FIT SYNCRO
COMET 60S can open a door height up to 3,4mt adding the optional extension accessory.
SPARK AERIAL
FIT SYNCRO
code ACG8051
EXTENSION
code ACG8202
EXTERNAL UNLOCK DEVICE
code ACZ9011
PUSH BUTTON FLAT
code ACG2013