Taking Pictures After Automatically Setting The Aperture Value And Shutter Speed (Program Ae Mode) - Panasonic LUMIX DMC-ZS100 Owner's Manual

Taking pictures after automatically setting the
aperture value and shutter speed
Recording mode:
Take pictures using automatic aperture values and shutter speed settings in accordance
with the brightness of a subject.
1
Set mode dial to [
2
Press the shutter button halfway
• If the aperture value and shutter speed flash red, you do not have the correct
exposure.
3
ZS100
While the numeric values are displayed
(approximately 10 seconds), rotate the
rear dial to change the values using
Program Shift
• The operation can also be performed by rotating the
control ring.
• To cancel Program Shift, either turn off the camera or
rotate the rear dial until the Program Shift indication
turns off.
ZS60
While the numeric values are displayed
(approximately 10 seconds), rotate the
control dial to change the values using
Program Shift
• The operation can also be performed by rotating the
control ring.
• To cancel Program Shift, either turn off the camera or
rotate the control dial until the Program Shift indication
turns off.
• Program Shift can easily be canceled by setting a function button to [One Push
AE]. (→108)
97
]
(→50)
(→51)
Recording mode
(Program AE Mode)
60
250 125 60
2.8
Shutter speed
Aperture value
Program Shift indication
p
30 15
4.0 5.6
SQW0547