Buttons/Dials/Levers Used For Recording; Zoom Lever (Use Zoom) - Panasonic LUMIX DMC-ZS100 Owner's Manual

Buttons/Dials/Levers Used for Recording

Zoom Lever (Use Zoom)

You can adjust the area of a picture to be taken using the zoom or control ring.
• You can also use the zoom function from the touch panel.
• For details about zoom types and use, refer to (→236).
Zoom lever
1
Move the zoom lever
ZS100
ZS60
T side: Telephoto, Enlarge the subject
W side: Wide-angle, Capture a wider area
●
Do not touch the lens barrel during zooming.
●
Adjust the focus after adjusting the zoom.
●
The camera may make a rattling noise and vibrate when the zoom lever or control ring is
operated. This is not a malfunction.
45
(→240)
Control ring
1 Turn the control ring *
ZS100
ZS60
*
You can perform zoom operation by assigning
the [Zoom] setting to the control ring.
Clockwise: Telephoto, Enlarge the subject
Counterclockwise: Wide-angle, Capture a wider
area
Basics
(→74, 75)
SQW0547