Q&A Troubleshooting - Panasonic LUMIX DMC-ZS100 Owner's Manual

Hide thumbs Also See for LUMIX DMC-ZS100:
Table of Contents

Advertisement

Recording
Cannot record pictures. The shutter will not operate immediately when the shutter button is
pressed.
• [4K PHOTO] is set to [
→ When [4K PHOTO] in the [Rec] menu is set to [
rises. In some cases, the camera may display [
recording to protect itself. Wait until the camera cools down.
• Focus is not aligned.
→ When [Focus/Release Priority] is set to [FOCUS], the camera will not record until proper
focusing is achieved.
Recorded pictures look white.
• Lens is dirty (fingerprints, etc.).
→ Turn the camera off and clean the lens surface with a soft dry cloth.
Recorded pictures are too bright/too dark.
• Adjust the exposure (→177).
• AE Lock
(→173, 175)
Some pictures are taken when I press the shutter button just once.
• Cancel the following settings:
– [Simultaneous record w/o filter]
– White Balance Bracket
– [Burst]/[Auto Bracket]/[
Focus not aligned correctly.
• Subject outside of focus range.
• Caused by jitter or subject movement.
• [Focus/Release Priority] is set to [RELEASE].
• [Shutter AF] is set to [OFF].
• AF Lock
(→173, 175)
• If there are fingerprints or dirt on the lens, the focus may be set to the lens and not the subject.
(When the Scene Guide Mode is set to [Soft Image of a Flower], and during macro recording)
Recorded pictures are blurred. The stabilizer function ineffective.
• Shutter speed is slower in dark locations and the stabilizer function is less effective.
→ Hold camera firmly with both hands, keeping arms close to body.
→ Use a tripod and the self-timer when using a slower shutter speed (→208).
• If you take a picture of a moving subject using the electronic shutter, the subject in the picture may
be skewed in some cases.
Taking pictures using White Balance Bracket is not possible.
• Is there any memory remaining on the card?
384
] ([4K Pre-Burst]).
(→164)
is set inappropriately.
(→132)
(→138)
] of the self-timer
(→46)
(→234)
(→163)
is set inappropriately.
(→199)
] ([4K Pre-Burst]), the camera temperature
], switch to [
(→201)
(→164)
Q&A Troubleshooting
] ([4K Burst]) and stop the
Others
SQW0547

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-zs60Dmc-zs100Dmc-zs60

Table of Contents