Recording Motion Pictures By Setting The Aperture Value/Shutter Speed (Creative Video Mode) - Panasonic LUMIX DMC-ZS100 Owner's Manual

Recording motion pictures by setting the aperture
value/shutter speed
Recording mode:
You can record motion pictures by manually setting the aperture value and shutter speed.
1
Set mode dial to [
2
Set the menu
→
3
Press
• The operation for changing the aperture value or shutter speed is the same as the
operation for setting the mode dial to [
It is also possible to display the selection screen by touching the
Recording mode icon in recording screen.
4
Press the motion picture button (or shutter button) to start
recording
5
Press the motion picture button (or shutter button) to stop
recording
●
About aperture value
• To record motion pictures with a sharp focus on both subject and background, set the aperture
value to a higher number. To record motion pictures with a defocused background, set a lower
number.
●
About the shutter speed
• To record a sharp motion picture of a fast-moving subject, set a faster shutter speed. To record
a motion picture with a trailing effect for a subject's movements, set a slower shutter speed.
• When you manually set a faster shutter speed, the screen noise may increase due to the higher
sensitivity.
• When you record a subject in an extremely bright place or under fluorescent or LED lighting
fixtures, etc., the colors and screen brightness may change or horizontal striping may appear on
the screen. If this happens, we recommend changing the Recording mode or manually adjusting
the shutter speed to 1/60 seconds or 1/100 seconds.
●
ZS100
When [Exposure Mode] is set to [M], [AUTO] of the ISO sensitivity will switch to [125].
●
ZS60
When [Exposure Mode] is set to [M], [AUTO] of the ISO sensitivity will switch to [80].
●
Drive mode settings are disabled.
124
(Creative Video Mode)
]
[Motion Picture] → [Exposure Mode]
to select [P], [A], [S] or [M], and press [MENU/SET]
], [ ], [ ] or [ ].
Recording mode
SQW0547
60