Adjusting The Flash Output - Panasonic LUMIX DMC-ZS100 Owner's Manual

Adjusting the flash output

Recording mode:
Adjust the flash output if a picture taken using the flash is too bright or too dark.
1
Set the menu
ZS100
→
ZS60
→
2
Press to set the flash output and press [MENU/SET]
Settings: -2 EV to +2 EV (unit: 1/3 EV)
When you do not want to adjust the intensity of the flash, select [±0 EV].
●
When the intensity of the flash is adjusted, [+] or [-] is displayed on the flash icon.
250
[Rec] → [Flash] → [Flash Adjust.]
[Rec] → [Flash Adjust.]
Stabilizer, Zoom and Flash
Setting the Flash Functions
SQW0547