Panasonic LUMIX DMC-ZS100 Owner's Manual page 260

Recording pans with little vibration or recording motion pictures with zoom [4K Live Cropping]
6
Press the motion picture button to start
recording
The display switches to the angle of view set in step
and the panning or zoom operation is displayed.
• Immediately release the motion picture button after
pressing it.
• When the set operating time has elapsed, recording
automatically ends.
• Zoom operation is not available.
• If a face is detected in the crop frame during recording,
the AF area frame is displayed, similar to step
■
To end [4K Live Cropping] recording midway
Press the motion picture button again during recording.
■
To cancel [4K Live Cropping] recording
Set [OFF] in step
●
[4K Live Cropping] recording cannot be performed when [High Speed Video] is set.
●
Brightness is measured and focus is done in the crop start frame. During motion picture recording,
they are done in the crop frame.
●
The metering mode will be [Multi Metering].
●
If you assign [4K Live Cropping] in [Fn Button Set]
display a screen that lets you switch [4K Live Cropping] between [40 sec.], [20 sec.], and [OFF] by
pressing the assigned function button. If you select [40 sec.] or [20 sec.], you can set the crop start
frame by pressing the [Fn1] button.
•
ZS100
You can do the same as above if you set [4K Live Cropping] via [CUSTOM] under [Q.MENU] on
the [Custom] menu (→69).
●
Touch AE is not available during recording with [4K Live Cropping].
●
[Touch AF] does not work during Auto Focus (→61).
●
1 Shot AF does not work during Manual Focus (→170).
260
3
.
Recording motion pictures
Elapsed recording time
4
5
.
(→70) under the [Custom] menu, you can
Set operating time
SQW0547